Outdoor coffee table, aluminum base and HPL top CORTEN finish.
Outdoor coffee table, aluminum base and HPL top CORTEN finish. Occasional table with basic lineas, it is ideal for corner areas yet applicable to main areas too. The special Corten finish give it a heavy-duty identity making it perfect both for private and contract fittings. The resistance of the materials allows both an outdoor and an indoor use.
Please check the finishes in the file attached and let us know your choice.
For more info contact us! firstname.lastname@example.org
Roberti offers a wide choice of fabrics suitable for outdoor use and with peculiar features. All fabrics are UV resistant and are available in the following price ranges:
GROUP A1 /A2: offers a wide choice of fabrics for outdoor use, some of them acrylic fabric from Sunbrella, some others polypropylene/polyester/acrylic fabrics, all combined with a polyurethane padding protected by a polyester cover, water repellent. The soft back pillows and the decorative pillows contain a mix of polyester chips inside a pvc - polyester, water repellent, cover. This is the ideal proposal for cushions you can leave outside, combining the comfort of a fabric with the full protection of the padding.
GROUP B1: the fabrics B1 - composed of pvc, polyester and polyurethane - are water repellent. The B1 fabrics combined with padding polyurethane foams completely protected by a pvc-polyester cover offer the best waterproof solution. It can happen that water may enter through the stitches; we therefore suggest to regularly open the fabric cover zipper to permit ventilation to the inside part of the cushion. Fabrics B1 are available only for part of the collection, as specified in the pricelist.
GROUP C1: the fabrics C1 - composed of pvc-polyester and polyurethane - have a light polyester padding fixed by a thermowelding with horizontal stripes and are water repellent. The C1 fabrics combined with padding polyurethane foams completely protected by a pvc-polyester cover offer the best waterproof solution. It can happen that water may enter through the stitches; we therefore suggest to regularly open the fabric cover zipper to permit ventilation to the inside part of the cushion. Fabrics C1 are available only for part of the collection, as specified in the pricelist.
All fabrics A1/ A2 can be hand washed on cold water (max. 30° C) and air dried. Ironing only at very low temperature. Fabrics B1 and C1 must be regularly cleaned with a wet cloth and a mild detergent, but not soaked.
It is also recommendable to open zippers of fabric covers regularly in order to permit ventilation inside the cushion to avoid mold stains.
Stains should be immediately removed to prevent they leave an imprint.
It is highly recommendable to read and carefully follow all suggestions given in the Care and Maintenance leaflet delivered with the furniture.
All cushions are entirely made in Italy using paddings of Italian origin.
All furniture frames are in aluminium and/or stainless steel treated with powder coating to ensure resistance to atmospheric agents and durability.
The woven parts are made of:
- TRENDYROPE (polyester rope - IMO tested) in CHARME, OASI and QUEEN collections
- SEAROPE (polypropylene rope - IMO tested) in CAPRI and LIPARI collections
- NAUTIC ROPE (polyester rope) in PORTOFINO and GRAVITY collections
- SUNROPE (a pvc rope with inside a polyester yarn - IMO tested) in KEY WEST collection
- SUNLOOM (polyester fibre coated with pvc) in CORAL REEF, CARIBE and ST. TROPEZ collections
- SUNWEAVE (polyethylene fibre) in HAMPTONS and IGLOO collections Batyline (polyester and pvc perforated texture) is used for seats on LIPARI and SAMBA RIO collections (excluding some items), PORTOFINO sunbed as well as CORAL REEF sunshade.
Textilene (polyester and pvc perforated texture) is used for some seats on SAMBA RIO and KEY WEST sunbed.
MARATEA chair has the seat in Tensiline (polyester and pvc perforated texture).
Table tops may be, according to description given in the pricelist for each model, either in tempered glass, clear or lacquered, or in HPL (high pressure laminate) suitable for outdoor use. White HPL tops have thin black edge. In the course of time, the top can show a slight bending which will remain within a tolerable level.
In CHARME collection the top for low tables can be also made of Terrazzo (Venetian grit with mother-of-pearl inserts, treated with neutral water repellent)
All materials used are suitable for outdoor; they withstand heat, cold, water and sea spray as well as UV rays.
KEY WEST: The double-beams are made of Iroko. Their permanent outdoor installation as well as their exposure to weathering creates an oxidation of the
surface, fading more and more to grey. To keep the original finish a periodic maintenance with protective oils for exterior woods is recommended.
To preserve the original beauty and ensure durability of the furniture and cushions we recommend to carefully follow the Care and Maintenance instructions given on the label joined to delivery of furniture. The product warranty does not cover damages caused by misuse or lack of maintenance.